资料介绍:
6) 5)
No. Name Usage
1)
Expansion cable
connector
A connector for signal transmission with the basic base
module or the other expansion base module. Connects the
expansion cable. Do not remove the supplied connector
cover.
2) Base cover PCB surface protection cover.
3)
Stage number
setting connector
A used to set the stage numbers of the expansion base
modules. Refer to section 4.2 for the setting procedure.
4) Module connector
Connector for mounting power supply unit, input/output unit
and special function module.
Mount the dustproof connector cover, blank cover unit
(AG60) or dummy unit (AG62) on the connector in the
spare spaces with module connected.
5) Module fixing hole Cut out to accept projection and hook at rear of modules.
6)
Screw hole for
fastening modules
A screw hole used for fastening a module to the base.
(M4 screw)
7)
Base module
installation hole
A hole used for mounting the base module to a panel such
as a control panel.