Note that even items ranked as " CAUTION", may lead to major results depending on the situation. In any
case, important information that must always be observed is described.


DANGER
Not applicable in this manual.


WARNING
Not applicable in this manual.


CAUTION
1. Items related to product and manual
If the descriptions relating to the "restrictions" and "allowable conditions" conflict between this
manual and the machine manufacturer’s instruction manual‚ the latter has priority over the former.
The operations to which no reference is made in this manual should be considered impossible.
This manual is complied on the assumption that your machine is provided with all functions.
Confirm the functions available for your machine before proceeding to operation by referring to
the specification issued by the machine manufacturer.
In some NC system versions‚ there may be cases that different pictures appear on the screen‚
the machine operates in a different way on some function is not activated.
2. Items related to faults and abnormalities

If the BATTERY LOW alarm is output, save the machining programs, tool data and parameters
to an input/output device, and then replace the battery. If the BATTERY alarm occurs, the
machining programs, tool data and parameters may be damaged. After replacing the battery,
reload each data item.
[Continued on next page]