Product Specification
Specification
her specifications than the followings are equivalent to those of the FX Series
main unit.
Item Specification
neral
ification
Withstand
voltage
500V AC, 1 min (between 9-pin D-Sub type port
and FX Series PLC main unit)
Insulation
resistance
5 MΩ or more, 500V DC by Megger
(between 9-pin D-Sub type port and FX Series
PLC main unit)
wer
ply
ification
Power supply
voltage, current
5V DC (supplied from PLC main unit),
max. 100 mA
ormance
ification
Transmission
standard
Conforming to RS-232C
Type of
isolation
Photo-coupler isolation
Transmission
distance
15 m or less
Connection
method
9-pin D-Sub type (male)
Number of
occupied I/O
points
0 point (unrelated to maximum number of
controlled points of the PLC)
Communication
method
FX1S/FX0N/
FX1N Half-duplex
FX2N
Full-duplex (Ver. 2.00 or later)/
Half-duplex (Earlier than Ver.
2.00)
FX2NC Full-duplex (Half-duplex also
possible)
Baud rate
Following baud rate can be specified when using
computer link or no protocol communication:
300/600/1200/2400/4800/9600/19200 bps
Communication
format
Computer link (dedicated protocol: format 1/
format 4), no protocol, optional programming port
LED display
(LED color)
Power: green, RD: red, SD: red
4.2 Outside Dimensions and Part Names
1) Mounting hole 2- φ4.2 (0.16)
Used when mounting the 232ADP directly.
Not used when mounting the DIN rail.
2) POWER LED
Lit while 5V DC power is supplied from main unit.
3) RD LED
Lit while receiving data from connected equipment via RS-232C po
4) SD LED
Lit while sending data to connected equipment via RS-232C port.
5) Cable
Used to connect to the main unit.
6) RS-232C port (9-pin D-Sub, male)
Used to connect with equipment via RS-232C port
7) Screws to fix a cable connector
Screw holes: #4-40UNC (inch screw thread)
8) DIN rail mounting clip
9) DIN rail mounting slot
4.3 Pin Configuration
The pin configuration of the RS-232C port on the 232ADP is as shown
74(2.92) 9(0.36)
7(0.28)
(Height of screw
16.1(0.64)
(to screw holes)
1)
2)
Unit:
19.1
(0.76)
8)
65.5(2.58)
(between screw holes)
10
(0.40)
90(3.55)
Weight:
Color:
DIN rail width:
3)
4)
5)
6)
7)
Approx. 0.1 kg (0.22 lbs)
Munsell 0.08GY 7.64/0.81
35 mm (1.37")