Guidelines for the safety of the user and protection of the FX-10GM unit
This manual provides information for the use of the FX-10GM unit. The manual has
been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows;
a) Any engineer who is responsible for the planning, design and construction of
automatic equipment using the product associated with this manual should be of
a competent nature,trained and qualified to the local and national standards
required to fulfill that role. These engineers should be fully aware of all aspects
of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature,trained
and qualified to the local and national standards required to fulfill that job. These
engineers should also be trained in the use and maintenance of the completed
product. This includes being completely familiar with all associated documentation
for the said product. All maintenance should be carried out in accordance with
established safety practices.
c) All operators of the completed equipment should be trained to use that product in
a safe and co-ordinated manner in compliance to established safety practices.
The operators should also be familiar with documentation which is connected
with the actual operation of the completed equipment.
Note: the term 'completed equipment' refers to a third party constructed device which
contains or uses the product associated with this manual.