CAUTION
Use the PLC in an environment that meets the general specifications contained in
this manual. Using this PLC in an environment outside the range of the general
specifications could result in electric shook, fire, malfunction, and damage to or
deterioration of the product.
Insert the tabs at the bottom of the module into the mounting holes in the base
module, and tighten the screws using the specified torque.
If the module is not properly installed, it may result in malfunctions, failure, or
fallout.
Securely connect a drive unit connector and peripheral connector to the
corresponding connector of the module.
If not attached properly, a contact error may occur, resulting in incorrect input or
output.
Always attach a cover to connectors that are not used. If not covered, malfunctions
may occur.
Do not directly touch the module's conductive parts or electronic components.
Doing so could cause malfunction or failure in the module.