[Installation Instructions]
CAUTION
z Use the programmable controller in an environment that meets the general
specifications contained in the user's manual of the CPU module to use.
Using this programmable controller in an environment outside the range of
the general specifications could result in electric shock, fire, erroneous
operation, and damage to or deterioration of the product.
z While pressing the installation lever located at the bottom of module, insert
the module fixing tab into the fixing hole in the base unit until it stops. Then,
securely mount the module with the fixing hole as a supporting point.
Incorrect loading of the module can cause a malfunction, failure or drop.
When using the programmable controller in the environment of much
vibration, tighten the module with a screw.
z Tighten the screw in the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to
damage to the screw or module.
z Completely turn off the externally supplied power used in the system before
mounting or removing the module.
Not doing so could result in damage to the product.
z Do not directly touch the conductive area or electronic components of the
module.
Doing so may cause malfunction or failure in the module.