1) When using Windows NT 4.0
When using Windows NT 4.0, ACT may be installed and used only on the
administrator's authority.
2) About Ethernet communication, computer link communication and CPU COM
communication on Windows 95
(a) Making Ethernet communication using UDP/IP on Windows 95 of the version
older than OSR2 will cause a memory leak. When performing continuous
operation on Windows 95, use Window 95 OSR2 or later.
(b) On Windows 95, communication using the COM port, e.g. computer link
communication or CPU COM communication, will cause a memory leak.
Therefore, do not perform continuous operation.
3) About overwrite installation
When performing overwrite installation, install the software in the folder where it
had already been installed.
4) Precautions for performing installation and uninstallation on a dual boot machine
where two different operating systems are installed in a single IBM-PC/AT
compatible personal computer
On a dual boot machine having Windows NT 4.0 (hereafter referred to as OS1) and
Windows 95/98 (hereafter referred to as OS2), note the following points when ACT
was installed on OS1 first and ACT was then installed over the same folder on OS2.
(a) If ACT is uninstalled first on the OS2 side, uninstallation does not delete the
control DLLs and ACT folders, and they remain within the IBM-PC/AT