1) Data type
Designates the type of the data to be added.
When Basic model QCPU is selected, common comment cannot be selected.
When the FXCPU is selected, only the comments by program can be selected.
2) Program type
Choose either of ladder program or SFC program. When creating an SFC on
the A series, make the following settings.
1. Set the microcomputer value in the memory capacity setting of PLC
parameters.
2. Choose SFC in the project type on the [Project]
[Edit data]

[New]
screen.
3) Data name of the data to be added
Designates the name of the data to be added.
If one of A series PLCs is set as the PLC type of the active project, the name is
fixed as SUB1, SUB2, or SUB3. (If the PLC type is A4UCPU, comments by
program, named SUB4, can also be added.)
Name of subprograms can be designated after completing memory capacity
setting for parameters.
For Q/QnA series, the name should be designated within 8 characters.
For FX series, MAIN is designated as the name.
Characters that may be used to set a data name
For A series
The data name of the A series accepts only alphanumeric characters, -
(hyphen) and _ (underline).
In the A series, an error will occur if the data name is headed by a numeral.
For Q/QnA/FX series
Alphanumeric characters, kana, kanji, _, ^, $,
–
, (tilde), !, #, %, &, ( ), -, { },
@, ' (single quotation)
Unusable characters
GX-OD1618
GX-MD1612
GX-ID1618
GX-ID1622
GX-ID3228
GX-ID3218
GX-JC03
GX-OD1628
3G3FV-PPGX2
GX-OC1601
GX-MD3228
GX-OD1612
E5CS-RGX
GX-AD0471
E5CS-Q1GX
GX-JC06
GX-OD1611
GX-MD1618
GX-OD3228
GX-MD1622
GX-EC0211
E5CS-R1GX
D6FZ-FGX21
GX-OD1621
GX-MD1621
GX-MD1628
GX-ID1612
GX-OD3218
GX-ID1621
GX-ID1611
GX-OD1622
GX-EC0241
GX-MD3218
GX-DA0271
GX-ID1628
GX-MD1611