Hong Kong
China
Taiwan
Korea
Country/Region Sale Country/Region Sales office/Tel
Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon
Hills, IL 60061 U.S.A.
Tel : +1-847-478-2100
MELCO-TEC
Av. Paulista 1439, conj.74, Bela Vista CEP:
01311-200 Sao Paulo-SP-Brazil
Tel : +55-11-3285-1840
Mitsubishi Electric Europe B.V. German
Branch
Gothaer Strasse 8, D-40880 Ratingen,
Germany
Tel : +49-2102-486-0
Mitsubishi Electric Europe B.V. UK
Branch
Travellers Lane, Hatfield, Hertfordshire.,
AL10 8XB, U.K.
Tel : +44-1707-276100
U.S.A.
Brazil
Germany
U.K.
Mitsu
(Hong
10th
Road
Tel : +
Mitsu
(Shan
17F, C
No. 2
China
Tel : +
Setsu
6F No
Hsian
Tel : +
Mitsu
Ltd.
3F, 14
Warranty
Mitsubishi will not be held liable for damage caused by fa
cause of Mitsubishi; machine damage or lost profits caused
products; damage, secondary damage, accident compen
factors unpredictable by Mitsubishi; damages to produc
products; and to other duties.
For safe use
• This product has been manufactured as a general-purpos
industries, and has not been designed or manufactured to
device or system used in purposes related to human life.
• Before using the product for special purposes such as nucl
aerospace, medicine or passenger movement vehicles, co
• This product has been manufactured under strict quality c
installing the product where major accidents or losses cou
fails, install appropriate backup or failsafe functions in the
This manual confers no industrial property rights or any rig
does it confer any patent licenses. Mitsubishi Electric Co
responsible for any problems involving industrial property r
a result of using the contents noted in this manual.
r resistor R is as follows:
switch) according to the ON or OFF time
e input signal to 1.5 ms or more.
e input signal to 0.5 ms or more.
Specification
1°F)
167°F)
condensation shall not be considered.
condensation shall not be considered.
ibration is present
Number of times of
sweep
eration Half amplitude
10 times in each of
X, Y and Z directions
(for 80 min)
− 0.075mm
s2 −
ibration is present
eration Half amplitude
− 0.035mm
s2 −
n each of X, Y and Z directions
not be present.
Input impedance
5.6 kΩ
1.7 mA or less
R: Bleeder resistor
(mA)
× 5.6(kΩ)
5.2 Input specifications
5.3 Performance specifications
Item Specification
Input method DC input (External power supply of the input part)
Number of inputs 4 points
Isolation method Isolation with photocoupler
Rated input voltage 24V DC
Rated input current Approx. 4 mA
Operating voltage range
20.4 to 28.8V DC (24V DC -15% to +20%)
Ripple ratio: Within 5%
Max. simultaneous ON
input points
100% (at 24V DC)
ON voltage/ON current 19 V or more/3 mA or more
OFF voltage/OFF current 11 V or less/1.7 mA or less
Input resistance 5.6 kΩ
Response
time
OFF→ON 0.5ms/1.5 ms or less (at 24V DC)
Selected by DIP switch (default value = OFF/1.5ms).
ON→OFF
0.5ms/1.5 ms or less (at 24V DC)
Selected by DIP switch (default value = OFF/1.5ms).
Common wiring method
4 points/1 common (2 points)
(terminal block two-wire type)
Item Specification
Module
power
supply
Vol tage
20.4 to 28.8V DC (24V DC -15% to +20%)
Ripple ratio: Within 5%
Current
consumption
40mA (when all points are ON)
Initial current 70mA
Max. allowable
momentary power
failure period
PS1:1ms
Number of stations
occupied
4-, 8- or 16-point mode: 1 station
Noise durability
500Vp-p
Noise width: 1µs Cycle: 25 to 60 Hz
(by noise simulator)
Withstand voltage
500V AC for 1 min between primary area (external
DC terminal) and secondary area (internal circuit)
Isolation resistance
10 MΩ or more between primary area (external
DC terminal) and secondary area (internal circuit)
by 500V DC megger
Protection class IP2X
I/O part connection method Connection with spring clamp terminal block
49(1.9
41(1.62")–0
4.5(0.18")
40(1.58")
Cen