X000,ON
X001,ON
Power on
RS instruction
drive
Data send
Turn on the power of the PC and
printer, check the printer is on line
and switch the PC to RUN.
Turn on X000, and drive RS
instruction.
Every time X001 is turned on,
the contents of D200 to D210
are sent to the printer, and
"test line" is printed.
l In this example, CR (H000D) and LF
(H000A) are written at the end of the
message.The printer moves down
one line for each message.
CR: Carriage Return
LF: Line Feed
Note:It may be necessary to set the
DIP switches of your printer.
Check your printer manual for how to
configure the serial communications.
Operation