esign precautions]
DANGER
Configure a safety circuit outside the PL C, so that the entire system operates
safety even if there is an external power error or if the PLC is malfunctioning.
(1) The output status to the outside varies, depending on the output status
setting in the external-output control setting mode: Please be careful
when performing the setting. Refer to the Section 3.3.9 of detailed manual
for details on the output status.
(2) Due to malfunction of the output el ement or its internal circuit, normal
output may not be obtained or erroneous output may be performed.
For output signals that may cause a severe accident, set an external
circuit to monitor the output.